Limewash Powder

USE’S OF LIMEWASH.

1. PAINTING ON EXTERIOR AND INTERIOR WALLS FOR WHITEWASH.

2. CAN PUT ON GARDEN AND OTHER PLACES FOR INSECTS

3. CAN BE POURED IN WATER LOCKINGS

4. ROAD CONSTRUCTION , SOIL IMPROVEMENT

5. EXTERIOR , INTERIOR, AGRI-SOIL -ROAD

Different type and grade, - Ab cem , Ab cem Plus , Ab cem Gold , Ab cem Agri

Points- We are one of the largest manufacturer of Limewash from more then 60 years now, we had been continuously doing R&D of material for Improvement of product.

We Directly selling this product , Raw material of Product and Doing job work for many companies as well . Due to Volume Production we can able to give best Quality in very Economical Rates.

AB CEM Features :

AB CEM is a premium quality sparkling White Lime Wash with PEARL FINISH .It is a product by Anurag bagaria Group. It is a high-quality hydrated lime produced using PEARL FINISH Whiteness Technology.

• Premium Quality (QC at every level of production)

• 5 Times more Coverage than White Cement

• Sparkling Super-Rich White Colour

• Excellent Smooth Finish

• Self-Bonding Property

• Decorative & Protective

• Save 25 to 30% Putty

• Anti-Wall Crust & Anti-Fungal

• Cost to User is less than 25p/Sqft/Coat

• Both Interior & Exterior Use

• Economical & Long Lasting

How to Apply AB CEM White Wash?

• Mix 70-80% Water by the Volume of AB CEM Powder to get a thick paste. Stir with a stick or using Paint Mixer.

• Add same quantity of water again to attain the required brush ability. (1 Kg requires 2.5 Litres Water)

• Allow the prepared mixture to mature for about 15 minutes before application.

• The surface should be rough and in Just-Wet condition.

• Apply first coat of White Lime Wash uniformly on surface with help of smooth paint brush or roller.

• After 10 to 12 hours, apply second coat of White Lime Wash in other direction.

• Allow complete drying for 24 hours.

Note:

•  Clear the wall with the help of emery stone, Remove dust, dust and foreign matter from the surface. It should be free from loose particles, grease and any other foreign materials. putty blade or wire brush and clean the surface with water.

• If the surface is very smooth  either old or new, scraping the surface with emery stone paper is recommended, before application Ab CEM